HA-Series is our line of interceptors with an asymmetric placed servo unit. This interceptor can be used when it has to fit under a water jet or if preferred area of the transom is limited, or when the inner structure on the inside of the transom does not allow for a centre placed servo. The HA-interceptor comes in sizes 500 – 1100mm and can be custom shaped for a perfect fit.
Available sizes: HA500 – HA1100 (50mm stroke, asymmetric)
Short shaft kit (standard),<80mm transom thickness.
Long shaft kit (option),<140mm transom thickness
Interceptor placement on the boat transom
The HCS-5 combines exceptional mechanical quality with electronic control including motion sensors and world class brushless servo motors to provide instant and exact response to the hull dynamics.
Adding the fine-tuned boat control options Automatic Trim, Automatic List, Coordinated Turn or Stabilization will result in optimum comfort and performance regardless if the captain is a seasoned expert or a less experienced operator.
All the units are connected with watertight cables with the servo motors positioned protected inside the hull. HCS-5 can easily be upgraded with more functions, interceptors and fins.
The HCU500-series control units consists of advanced sensors, calculating algorithms and works on 11 – 32 VDC. The control unit handles the system functions, controls the servo motors and powers the system. In a network with electrical fins, these are separately powered by 24VDC electricity.
CP502 is our advanced control panel – very easy to use – with a large colour display which is sunlight readable and therefore also suitable for outdoor installation, such as the flybridge. The control panel can change between day- and night mode and user selectable colour themes. CP502 is NMEA2000 certified which makes many installations easier. For service and support the control panel has an integrated Wi-Fi access point that enables remote access via your Internet connected device such as a mobile phone or computer.